frozen raspberry processing business

SaniDate 5.0 is a broad-spectrum sanitizer/disinfectant that controls plant and human-health pathogens. SaniDate 5.0 can be applied to hard surfaces, including food contact areas, and be used to disinfect irrigation lines and control biofilm, algae and bacteria. SaniDate 5.0 kills water borne pathogens without being pH dependent and won’t clog emitters.

Active ingredients: hydrogen peroxide and peroxyacetic acid
No mutational resistance
Label includes human health pathogens
Fast acting
No rinse required

WHAT APPLICATIONS CAN I MAKE WITH SANIDATE 5.0?

Direct Injection into Dump Tanks, Hydrocoolers, Spray Systems, and Process Waters
For treatment of water containing plant pathogens, inject SaniDate 5.0 and maintain a predetermined residual level by using metering equipment, coupled with ORP measuring probes.

Fogging
SaniDate 5.0 can be used as an adjunct to acceptable manual cleaning and disinfecting to treat hard, non-porous room surfaces in dairies and beverage/food processing plants.

Mold and Mildew Control
SaniDate 5.0 effectively inhibits the growth of mold, mildew, and the odors they cause when applied to hard non-porous, non-food contact surfaces.

WHAT IS SANIDATE 5.0’S MODE OF ACTION?

SaniDate 5.0 works through an oxidation chemical reaction that kills bacteria and fungus. More specifically, SaniDate 5.0 reacts on contact with the enzymes and proteins that make up simple cell organisms such as animal and human health pathogens.

DOES SANIDATE 5.0 CONTROL HUMAN HEALTH PATHOGENS?

SaniDate 5.0 not only eliminates plant and animal pathogens, it is labeled to kill human health pathogens on hard, non-porous surfaces such as:

Escherichia coli (e-coli)

Staphylococcus aureus

Pseudomonas aeruginosa

Salmonella enterica

Pediococcus damnosus

Lactobacillus malefermentans

Gram positive and gram negative bacteria

GENERAL APPLICATION INSTRUCTIONS

Application RateFrequency of ApplicationDirections
0.5 fl. oz./1 gallon of waterAs neededApply with a mop, cloth, sponge, brush, scrubber or coarse spray device or by soaking. Wet thoroughly.

Wait 10 minutes then remove solution and entrapped soil with a clean wet mop, cloth, or wet vacuum pickup.

Can also be applied by fog or foam.

Direct InjectionFl. Oz./1,000 GallonsFrequencyDirections
Irrigation Water Sanitation1:30,000 – 1:2,5004.27 – 51.2Continual or periodicUse suggested rate and/or submit water sample to BioSafe Systems to determine proper rate.

SANIDATE 5.0 LABELS