SaniDate WTO will control algae, bacteria, fungi, and plant pathogenic organisms in drip, center pivot, lateral move, end tow, side wheel roll, traveler, overhead sprinkler, hand move or flood basin irrigation systems.
How should SaniDate WTO be used?
SaniDate WTO works through an oxidation chemical reaction that kills bacteria and fungus. More specifically, SaniDate WTO reacts on contact with the enzymes and proteins that make up simple cell organisms.
|Crop Irrigation Water||1:22,000 – 1:2,750||5.8 – 46.5 fluid oz /1,000 gallons||Product can be injected directly into the irrigation water at the point of intake. For best results, continuous injection into the water is recommended every time crop is irrigated or at a minimum, in the last 2 – 3 irrigations prior to harvest.|
|Treatment of Irrigation Systems||1:500 – 1:2,500||0.4 – 2.0 gallons / 1,000 gallons||Allow a contact time of 6 – 12 hours or overnight if possible. Open ends of irrigation lines and flush with irrigation water. Depending on the contamination level in the irrigation system as determined by water analysis a second shock treatment may be necessary.|
Labels & Certifications
- SaniDate® WTO Label
- SaniDate® WTO California Label
- SaniDate® WTO SDS
- OMRI - Crop Pest, Weed, and Disease Control (CP)
- OMRI - Crop Management Tools and Production Aids (CT)
Not all uses and applications are approved in all states/provinces. Always consult a product’s label before use.